Loading... Please wait...

Our Newsletter

Xesta Slow Emotion Rods (for slow pitch jigging)

Your Price:
$422.55 (You save $27.21)
Ships in 24 - 48 hours

Product Description

The tip enters sharply with a light reeling operation and returns without inserting a hair clip. The speed and torque of this return makes the jig momentarily transverse and self-propelled. I just can not enter the tip with only a hard one. Tip does not return with just softness. As a result of reprofiling the prototype several times, the rod which had the torqueful and supple tip was completed with the tough butt power which is the feature of XESTA intact. The length of 6.8 ft is a valid length for both jerks and falls, it is a Versatile shaft that pulls out Angler's technique to its full extent and binds it to fishing tributes. In 2015, the guide system, the decoration was redrawn again, further pursuit of weight balance and high sensitivity, further evolution.


Titanium KW guide (Torzizite) in the butt section, titanium LDB guide (SiC) in the tip section, titanium MN top guide (SiC) adopted. Avoid line trouble at fall and slow pitch.


It corresponds to technical jerking by applying non-slip processing and original paint to DPS 20 reel seat with good hand fitting. Improved grip performance by engraving lines by embossing on EVA. Equipped with original aluminum hood.


Designed to the minimum size necessary for jerking and fighting. In addition, embossing was applied to improve side hold property. The end part marked XESTA mark.



  Product   Length   Length     Conduction #     Dance   Own Weight   Tip Diameter   Original Diameter    Adapted   Jig    Recommended Line Carapon Content  
B682 6'8" 2.04m One 204cm 121g 1.9mm 9.9mm Ave 150g PE 2.0 99%
B683  6'8" 2.04m One 204cm 127g 2.0mm 10.1mm Ave 200g PE 2.0 99%
B684 6'8" 2.04m One 204cm 129g 2.0mm 11.0mm Ave 250g PE 2.0 99%



Full length: 
6'8 "ft (2.04 m)

The jig's drowning motion is generated for a long time in a fall which takes advantage of the length by chopping the metal jig of around 80 to 150 g with slow pitch. This made it possible to carry out the slow pitch jerk in the bay area and the area where the tidal current is loose lightly without stress. Still more sticky but firmly restoring blanks performance makes it possible to make self-propelled metal jewels around 180-200 g to the moors, and it will be useful as a part of breakthrough criticism.


Full length: 6'8 "ft (2.04 m)

A model that is good at slow pitch jerk of metal jig around 150 ~ 220 g which is the main weight of the near sea. By using unique pitch carbon technology and taper design, you can change the pitch freely and intentionally change the jig's free running distance, enabling you to operate technical jigs at will by the angler. Versatile tiles that can handle from green to root fish can be used as a standard one in the near waters area.

Full length: 6'8 "ft (2.04 m)

A model that demonstrates its power in various ranges by carving metal jigs around 180 to 300 g in delicate pitches in an area with a depth of 80 to 150 m. The tip with the firmness and the torqueful berry can be operated not only lightly but also the rod follows the intense pull-in of an unexpected large fish and lift it. Because it is possible to efficiently produce the basic method of letting you show it and let it eat it, it corresponds to many targets from the blue to the bottom and can fully enjoy the real pleasure of the slow pitch jerk.





Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency Converter

Choose a currency below to display product prices in the selected currency.

Australia AUS
Spain EURO
Brazil Real
United States USA

Add to Wish List

Click the button below to add the Xesta Slow Emotion Rods (for slow pitch jigging) to your wish list.

You Recently Viewed...